Air Spot Drill with 5.5" Deep Clamp Kit & 4 Drill Bits
Mfg: Astro Pneumatic
|
- Kit Includes: Air Spot Weld Drill, 5.5" Deep Clamp, (4) Drill Bits, End Line Oiler, 3 Way Swivel, Plastic Blow Molded Case
- 2 Speed
- Adjustable depth stop which allows you to drill out just the spot weld and not the panel beneath
- Drills out the entire spot weld, eliminating the need for grinding
- Drill Bit Size Chuck Cap.: 5/16"
- Free Speed: 2, 000rpm
- Air Inlet Thread NPT: 1/4"
- Air Hose I.D. Size: 3/8"
- Avg. Air Consumption: 4cfm
- Air Pressure: 90-120psi
|
|
|
|
ENFORCER SPOTWELD DRILL
Mfg: Blair
No Picture
|
|
|
|
|
|
COBALT SPOTWELD BIT 8X80M
Mfg: DFX
|
|
|
|
|
|
8 x 80mm Tin SpotWeld Bit
Mfg: DFX
|
- Titanium coating help prevent the bit from dulling due to overheating - Extends drill life by about 50%
- Flat ground for strength, centering nib to prevent walking
|
|
|
|
8.0mm HSCO Spot Weld Drill Bit
Mfg: DFX
|
- For high strength steels
- Titanium coating help prevent the bit from dulling due to overheating - Extends drill life by about 50%.
- Flat ground for strength, centering nib to prevent walking
|
|
|
|
6.5MM HSCO Spot Weld Drill Bit
Mfg: DFX
|
- These drill bits are specifically designed for the abuse of spot weld drilling
- Flat ground for strength, centering nib to prevent walking
- These Cobalt high-speed steel mix bits are 45mm long and work with all brands of spot-weld drills
- Titanium is a heat resistant coating that extends drill life by about 50%.
|
|
|
|
8.0mm HSCO Titanium Spot Weld Drill Bit
Mfg: DFX
|
- For high strength steels
- Titanium coating help prevent the bit from dulling due to overheating - Extends drill life by about 50%.
- Flat ground for strength, centering nib to prevent walking
|
|
|
|
"The Extender" .5 inch drill bit extension
Mfg: DFX
|
- Works with any 3/8" drill
- Spot weld drill bit extension that adds 6-1/2 inches of length
|
|
|
|
"The Extender" Kit 6.5 inch drill bit extention
Mfg: DFX
|
- When access is limited or obstructed either by a structural member or other component, we have a solution...
- “The Extender” is a spot weld drill bit extension that adds 6½ inches of length, letting you get to those deep and hard to reach spot welds
- The plastic sleeve protects any nearby structures from damage and cables from getting tangled. You can stabilize the drill point by holding here
- Works with any 3/8" drill. Recommended not to exceed 1800 rpm
- Includes DF-1480 8 mm HSCo drill bit.
|
|
|
|
1/4" Hole Punch
Mfg: DFX
|
- The most efficient hole punch that you will ever own
- Little pressure is needed to punch out holes.
- With the 1-1/4" deep throat you will be able to get the best overlap capability for your plug welds.
|
|
|
|
Bookmark us!
)
)
)
)
)
)
)
)
)
