|
APT7867 - FAN CLUTCH WRENCH SET
Removes and Installs The Fan Clutch On Most Ford Models
Mfg: Astro Pneumatc
- Removes and installs the fan clutch on most Ford models
- For use when repairing or replacing the water pump, timing chain or the fan clutch
- Set Includes:
- 1 - 58mm fan clutch wrench
- 1 - 3-1/4" fan clutch wrench
- 1 - 1-7/8" fan clutch wrench
- 1 - 36mm & 1-9/16" fan clutch wrench
- 1 - blow molded case
- Double-ended wrench and small holding wrench work on 2.8, 2.9, 3.0, 4.0 & 4.9 liter engines
- Larger open-ended wrench and large holding wrench fit 6.9 & 7.3 liter diesel engines
|
|
|
APT7895 - 10 PC. UNIVERSAL FAN CLUTCH WRENCH SET
Allows you to hold the fan clutch with the clutch holder tool,
while using the special wrench to turn the fan clutch nut
Mfg: Astro Pneumatc
- Allows you to hold the fan clutch with the clutch holder tool, while using the special wrench to turn the fan clutch nut
- Square drive allows use with a breaker bar for extra torque.
- Complete service kit includes:
- 2 1/4" & 3 1/4" fan pulley holding tools
- 2 3/8" fan clutch bolt holding tool
- 2 1/8" and 3" fan clutch pulley holding tools
- 2 13/16" fan hub wrench
- 1 7/16" fan clutch nut wrench
- 1 7/16" & 1 9/16" fan clutch wrench
- 1 7/8" left hand clutch nut wrench
- Comes in molded carrying case
|
|
|
|
KD3950 - 2 PC 6.0L FAN CLUTCH PULLEY HOLDER
Designed for Fan Clutch Removal on 2003 and
Above Ford 6.0-L Powerstroke Engines
Mfg: KD Tools
- Designed for Fan Clutch removal on 2003 and above
Ford 6.0-L Powerstroke engines
- Unique Fan Clutch Wrench grips and securely holds the
pulley housing
- Fan Clutch Holding Tool to loosen and remove oval
or round hole holding nut
|
|
|
LS41800 - FORD FAN CLUTCH WRENCH SET
Removes and Installs Fan Clutch on Most All Ford Vehicles
Mfg: Lisle
- Removes and installs fan clutch on most all ford vehicles
- For use when repairing or replacing the water pump, timing chain or the fan clutch
- Set includes two holding wrenches and two open-end wrenches
- The double-ended wrench and small holding wrench work on 2.8, 2.9, 3.0, 4.0 and 4.9 liter engines
- The larger open-end wrench and larger holding wrench fit 6.9 and 7.3 liter diesel engines
|
|
|
LS42920 - FAN CLUTCH WRENCH SET
Removes and Installs Fan Clutch on Most Models
Mfg: Lisle
- Removes and installs fan clutch on most models
- This 2-piece set removes and installs fan clutches
- The set includes a universal holding wrench and a universal turning wrench
- The holding wrench is adjustable to fit the bolts that attach the pulley to the water pump
- The turning wrench has the 5 common fan clutch nut sizes built into one tool: 7/8" (22 mm), 1 7/16" (36 mm), 1 9/16" (39 mm), 1 7/8" (47 mm) and 2" (50 mm).
- Both wrenches are long to provide extra leverage for stubborn fan clutch nuts.
- Made of heat treated alloy steel to provide strength
|
|
|
LS43300 - 4 PC. PNEUMATIC FAN CLUTCH WRENCH SET
Quickly Removes & Installs Fan Clutch When Repairing
The Water Pump Or Fan Clutch
Mfg: Lisle
- Quickly Removes & Installs Fan Clutch When Repairing The Water Pump Or Fan Clutch
- Does the job much faster and easier than conventional fan clutch wrenches
- No holding wrench is necessary
- The set includes 7 driving wrenches that fit Ford, GM and Chrysler
- Driving wrench sizes include: 36mm, 1 1/2", 1 9/16", 41mm, 42mm, 1 7/8" and 2".
- Use with an air hammer
|
|
Bookmark
)
)
)
)
)
