FERV040-01 - CHARGING SYSTEM ANALYZER Works On Vehicles With 6 - 12 volt Batteries
Mfg: Ferret Instruments
Works on vehicles with 6 - 12 volt batteries
Test charging & starting system in minutes
Takes doubt out of electrical power repairs
Load on indicator -- Carbon pile load control
Inductive amp probe
MID500L1 - DIGITAL CHARGING SYSTEM ANALYZER Provides Complete Starting and Charging System Analysis
Mfg: Midtronics
Provides complete starting and charging system analysis
Test discharged batteries down to 1 volt
Detects excessive starter draw
Works with all 12 and 24 volt charging systems
Analyzes diode and voltage regulator functionality
Includes 15' cable and carry case
MID700KIT - HEAVY DUTY CHARGING SYSTEM ANALYZER KIT Includes Analyzer, Printer, (4) Stud Adapter, Extra Paper Roll and Carry Case
Mfg: Midtronics
Includes analyzer, printer, (4) stud adapter, extra paper roll and carry case
Tests multiple batteries in parallel, series, or series-parallel configurations
Tests 12 and 24 volt battery systems from 100-3500 CCA -- 6 and 12 volt batteries from 100-1700 CCA
Tests discharged batteries down to 1-volt
Gives a decision - no user interpretation required
MID MDX-P300 - BATTERY CONDUCTANCE/ELECTRIC SYSTEM TESTER With Built In Printer
Mfg: Midtronics
With Built In Printer
Tests batteries from 100-1400 CCA
Tests regular, AGM and GEL Batteries
Reverse polarity protection
OT3131 - MINUTEMAN PLUS ELECTRIC ANALYZER Displays Cranking Volts and Amps, Indicates Either "Good Starter" or "Bad Starter"
Mfg: OTC
Displays cranking volts and amps, indicates either "Good Starter" or "Bad Starter"
Includes connectors cables, internal rechargeable battery, battery charger, instructions and cart
Tests batteries, alternators, regulators, and starters. Direct-from-battery tachometer feature gives RPM readings without complicated hookups to ignition system. Also, ammeter/voltmeter capabilities
Evaluates discharged or charged batteries in one minute. Tests all 12-volt automotive and heavy-duty batteries with cold cranking amp ratings of 100-2000
Has its own internal battery; no external power source needed
Checks charging system at high RPMs and at idle, and stores the data. Results show regulator volts, peak amps, and diode condition. Utilizes wave form analysis when testing alternator diodes; more accurate than “ripple voltage” tests
Bookmark
)
)
)
)
)
)
)
