|
MO1300 - SILL HOOK
Gripping Surface: 2 1/2" Wide and 1" Deep
Mfg: MO-Clamp
- Gripping surface: 2 1/2" wide & 1" deep
- One of the handiest tools in the shop for a quick pull almost anywhere
- New round opening allows for pulling with a slip hook
- New casting process makes for a tighter grain structure, resulting in more strength
- The original straight-cut tooth design pattern is machined for superior gripping and pulling power
|
|
|
MO1320 - SLIM LINE SILL HOOK
Throat Depth: 4 3/4"
Mfg: MO-Clamp
- Throat Depth: 4 3/4"
- Use this new hook from Mo-Clamp to pull front hinge pillars, center pillar posts, rear hinge sections or any location where you need a broad, thin pulling surface
- Made from Mo-Clamp Tru-Tuff drop forged, heat treated alloy steel with a pulling capacity of a full 4 tons
- Heavy duty eye nut allows easy connection with Mo-Clamp chain and slip hooks
|
|
|
MO1850 - INLINE SLIDER CLAMP
New Generation Of Self-Tightening Mo-Clamps
Mfg: MO-Clamp
- New generation of self-tightening Mo-Clamps
- Gripping surface: 3" wide -- Capacity: 5 Tons
- Made of heat treated Tru-Tuff steel alloy
- Grabs on to flanges and provides a sure grip while pulling "in-line"
- Finger grips are cast into the tool to provide easy handling while positioning the clamp
|
|
|
MO3100 - MO-HOLE ANCHER POT
Used As A Bolt-Down Applicaton Using A 1 1/4" Bolt
Mfg: MO-Clamp
- Used as a bolt-down applicaton using a 1 1/4" bolt
- Alloy heat-treated hooks increase pulling options
- May be used with Hole Pull Plates (#0810 & #0820) to pull, or use in combination with clamps
- Includes one each: small flat nose, small round nose SMH, large flat nose SMH, large round nose SMH
|
|
|
MO4058 - MAC II MULTI-ANGLE CLAMP
Gripping Surface: 3 3/4" Wide and 5/8" Deep
Mfg: MO-Clamp
- Gripping surface: 3 3/4" wide and 5/8" deep
- New style features cross-hatch tooth pattern which holds well with less distortion of metal
- Larger pull plate is adjustable and reversible, for more multi-angle pulls
- Clamp has raised "ears" to hold bolts stationary, for easy tightening
|
|
|
MO4145 - DOUBLE GRAB HOOK ASSEMBLY
For Easy 3/8" Chain Connection
Mfg: MO-Clamp
- For easy 3/8" chain connection
- Used as a bolt-down applicaton using a 1 1/4" bolt
|
|
|
MO6317 - J HOOK WITH CHAIN
With "J" Hook
Mfg: MO-Clamp
- With "J" Hook
- Overall length: 9" -- Capacity: 4 tons
|
|
|
MO6318 - J HOOK WITH GRAB HOOK
Overall length: 9" -- Capacity: 4 tons
Mfg: MO-Clamp
- Overall length: 9" -- Capacity: 4 tons
|
|
|
MO6400 - REGULAR DEEP HOOK SET
6" (152mm) Throat Depth; 14" (356mm) Throat Opening
Mfg: MO-Clamp
- 6" (152mm) throat depth; 14" (356mm) throat opening
- For fast hook-ups on cowls, door posts and trunk openings, or to reach into cramped places
- Small bracket (2" x 3") and large bracket (2" x 9") are included in set
|
|
Bookmark
)
)
)
)
)
)
)
)
)
